Jabbla Tellus 5, Руководство пользователя

Страница: 31 / 46

Tellus 5
3 Setting the speaker volume
1.
Right-click Tellus5 in the system tray and select Options from the shortcut menu.
2. Move the Speaker volume: slider to change the volume on the device.
NOTE
When the slider is halfway, it corresponds to the maximum Windows volume.
NOTE
The
Speaker volume:
slider of the Tellus is identical to the general volume slider in Mind Express.
CAUTION
Adjust the volume using Options instead of using the Windows volume.
3. Click OK .
See also
Switching the speakers on or off on page 28
4 Switching the headphones on or off
When the device is switched on, by default the sound is sent to the headphones.
1.
Right-click Tellus5 in the system tray and select Options from the shortcut menu.
2. Click on one of the following buttons next to Headphones: :
▪ On , to send the sound to the headphones.
▪ Off , to NOT send the sound to the headphones.
3. Click OK .
5 Switching the microphone on or off
When the device is switched on, by default the microphone is off.
NOTE
It is recommended to leave the microphone switched off. In Mind Express, the microphone is automatically switched on and off when you make a
recording. Only switch on the microphone if you are using an application that is not a Mind Express application, and which requires a microphone (such
as Skype). After using the application, switch off the microphone.
1.
Right-click Tellus5 in the system tray and select Options from the shortcut menu.
2. Click on one of the following buttons next to Microphone: :
▪ On , to switch on the speakers of the Tellus.
▪ Off , to switch off the speakers of the Tellus.
3. Click OK .
6 Setting the microphone volume
You can use the microphone volume to turn up or turn down the sound recording via the microphone. This can be necessary when recording in Mind Express or
when using an application such as Skype.
1.
Right-click Tellus5 in the system tray and select Options from the shortcut menu.
2.
Move the
Microphone volume:
slider.
3. Click OK .
7 Starting up the device using a switch
The Tellus 5 can be started up using switch 1. You can specify how long to hold and press switch 1 before Tellus 5 starts up.
1.
Right-click Tellus5 in the system tray and select Options from the shortcut menu.
2. Select one of the following options from the Switches options group, Switch 1 starts device: drop-down list:
▪ <Don't start> , the device cannot be started up using a switch.
▪ Immediately , the device starts up immediately after pressing switch 1.
▪ After 1 sec , the device starts up after holding and pressing switch 1 for 1 second.
▪ After 2 sec , the device starts up after holding and pressing switch 1 for 2 seconds.
▪ ...
▪ After 9 sec , the device starts up after holding and pressing switch 1 for 9 seconds.
3. Click OK .
F Settings
4 Switching the headphones on or off
29