5. Operation Controls and Functions
5.1 Transmitter Panel
DC 24V/1A power supply input port.
Note that the extender supports PoC function, it means that either
transmitter or receiver is powered on by 24V/1A power adapter, the
other one doesn’t need power supply.
HDMI loop output for display.
SERVICE
IR IN
IR OUT
HDMI OUT
HDMI IN
HDBT OUT
DC 24V
Name
Function Description
Power LED
Red LED indicates that the transmitter is powered on.
SERVICE port Firmware update port.
DC 24V
HDBT OUT
Connection
Signal
Indicator lamp
▪ Illuminating: Transmitter
and Receiver are in good
connection status.
▪ Flashing: Transmitter and Receiver are in poor connection
status.
▪ Dark: Transmitter and Receiver are not connected.
Data Signal
Indicator lamp
▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
HDMI OUT
HDMI IN
HDMI source input.
IR IN
IR input port for receiving the signal of IR remote.
IR OUT
IR output port for control of source device. This IR output signal
is from the IR IN port of receiver.
RJ45 connector for connecting the HDBT IN port of receiver
with a CAT 5e/6 cable.
4 / 9
1
2
3
4
7
8
9
10
11
5
6
No.
1
2
3
4
5
6
7
8
9
10
