J-Tech Digital JTECH-VWM90, Руководство пользователя

Страница: 18 / 22

18 | P a g e
5x3 3024x2835@30Hz 3840x3600@60Hz 1280x720@60Hz
5x4 3008x2115@30Hz 5120x3600@60Hz 1280x720@60Hz
5x5 4080x2295@30Hz 6400x3600@60Hz 1280x720@60Hz
6x2 1920x3240@30Hz 2560x4320@60Hz 1280x720@60Hz
6x3 2640x2970@30Hz 3840x4320@60Hz 1280x720@60Hz
6x4 3072x2592@30Hz 5120x4320@60Hz 1280x720@60Hz
8x3 2160x3240@30Hz 3840x5760@60Hz 1280x720@60Hz
5. Common Problems
1.
What is the output resolution of the loop-out interface?
If the loop-out interface of the first device outputs 3840x2160 resolution, the resolution of the
DP input signal of the second device is 3840x2160 resolution.
2. Sometimes, the dial code or remote-control switch does not respond.
Because the setup involves resolution switching, it takes a certain time (1s). If the display does
not meet expectations, it can be restored by power off again.
3. Is there a flash line in cascade mode?
Please use DP cable provided by the manufacturer to connect the cascaded DP port.
4. What is the order of the output screen?
Top to bottom, left to right.
5.
There are errors in remote control when cascading. Some devices respond to the remote-
control commands normally, and some devices don’t.
It is recommended to put the equipment together when using remote control in cascade.
6. How to recover when an error occurs?
Press the clone key, then press the key. Return to [output copy mode, input single picture]
status. When the cascade device settings are synchronized, continue with other settings.
7. What is the default IP address and web login password?
The default IP address is 192.168.1.192 and the default web login password is admin1