⑤
Aspect:
Click “Full Screen” or “16:9” to switch the display aspect.
Only the following modes are available: PBP(1)-PBP(2)-Triple(1)-Triple(2)-Quad(2).
⑥
Auto Switch:
Enable or disable the function of automatically switching input signal
source, available only in SINGLE mode.
⑦
Output Setting:
Set the output resolution, video keep alive, PC/Video PQ, HDCP,
audio source and audio output.
■
System Page
17
You can do the following operations on the System page:
①
EDID Mode Control:
Click the drop-down list on the right to select EDID mode.
②
Firmware Upgrade:
Click the folder icon on the right to import the firmware
upgrade file, then click “Upgrade” to start upgrade. There will be a progress bar prompt
during the upgrade process. When the progress bar reaches 100%, it indicates the
upgrade is successful, and the device will be restarted automatically.
③
Factory Reset:
Click “Reset” to reset the device to factory default settings.
④
System Reboot:
Click “Reboot” to reboot the device.
