J-Tech Digital JTD-220, Руководство по установке

Страница: 12 / 16

DHCP - Disable/Enable - It is recommended you leave DHCP disabled and assign a static IP address
to your encoder so that you know where to access the WEB GUI.
IP - This is the field where you will enter your new static IP address for the encoder that matches
your current network's scheme
Netmask - Set the netmask based on your connected network. In the above example, our network is
Class C so our subnet mask is 255.255.255.0
Gateway - Enter the gateway address of your network's router
MAC - This is the MAC address of your encoder and does not need to be edited.
After you have customized your settings, hit the 'Apply' button at the bottom of the screen. A
notification window will pop up saying that the changes were saved and that a reboot is required.
To reboot your encoder, navigate to
System > Reboot
After your device has rebooted and your changes have saved, directly connect your encoder to
your network switch or router via ethernet cable.
Reconnect your computer to your network switch or router via ethernet cable or ensure you still have
connectivity to the network via WiFi.
If connecting to your network via ethernet, you'll want to change your PC's IP address settings back
from the static IP address you set (192.168.1.100) to DHCP.
Navigate to -
Control Panel > Network and Internet > Network and Sharing Center
Then, on the left hand side select 'Change Adapter Settings'