Assembly and Operating Manual Explorer EDF
6
Fi
Fig. 13
-
located the battery
Fig. 14
- Connect the battery and ESC
Fig. 15
-
Congratulations
, you have completed the
assembly process. We hope you enjoy flying your
new model!
Fig. 16
Photo shows the balancing weight.
- Place the canopy on the fuselage.
- Place the battery in the model of balancing; do not
connect it.
- Make the Centre of Gravity on both sides.
- Support the model at the marked C.G. and allow it
to hang freely. The model is correctly balanced
when it hangs level, ideally with the nose inclined
slightly down.
- Adjust the position of the flight battery if necessary.
- Mark the battery location in the fuselage, so that
you can be confident of replacing it in the same
position after removing it.
13
15
14
16
