J Plus Juni JLT622P, Руководство пользователя

Страница: 31 / 88

J Plus, Inc
www.juniglobal.com
J Plus Proprietary and Confidential
31/88
In Add a Network Interface page, you can add a Network Interface. Click Add button and then new Network
Interface will be added and shown in Registered Network Interface page. In Registered Network Interface, can
configure Vlan ID, Vlan Priority, and size of MTU. The device supports IPv4/IPv6.Modified Network Interface’s
information will be applied after the unit reboot. A registered Network Interface can be modified and deleted in
Registered Network Interfaces page.
There is a selection box to choose either DHCP or Static IP for JLT622P in connection type
. Select DHCP and
click on save, then the display shows as Figure 15. If no DHCP server is available, the IP address cannot be
assigned to JLT622P.
On the other hand, if Static IP is selected, the user can configure the static IP address, Subnet Mask, Default GW
and DNS address manually. IP address configuration can be applied to the system after clicking Add and
rebooting device, as shown in the Figure 16andFigure 17.
After configuring Vlan and network information, click Add button. Verify registered Network Interface’s information
was applied, as shown in the Figure 18 and Figure 19.
Figure 18: Vlan Configuration