J Plus, Inc
6.2.3.1
Basic
From the tree menu, select Basic to move onto the eNodeB basic system parameters setting page as shown in
Figure 30. eNodeB basic system parameters including TDD configuration (Subframe Assignment and Special
Subframe Pattern) can be amended by clicking Apply button.
When the Basic configuraiton settings has been changed, it must be save button click and reboot to
apply the changes.
Main Parameter
Description
eNodeB Basic Configuration
eNodeB Type
eNodeB type for the serving cell (Macro or Home).
Cell ID
E-UTRAN Cell Identifier (ECI). Value should be put in decimal form.
TA Code
Tracking area code. Value should be put in decimal form.
PCI
Physical Cell Identifier for the serving cell.
Freq Band Indicator
E-UTRA operating band (broadcast in SIB1).
DL/UL EARFCN
DL/UL serving EARFCN.
Bandwidth
System bandwidth in MHz.
PLMN ID
PLMN ID (MCC+MNC).
Subframe Assignment
Defines the DL/UL subframe configuration for TD-LTE.
Special Subframe Patterns
Defines the configuration of the special subframe for TD-LTE.
E-UTRA frequency
DL/UL EARFCN
DL/UL EARFCN list. EARFCN set must include the serving DL/UL EUTRA.
CELL Reselection Priority
Cell reselection priority for specific EUTRA frequency.
Offset Frequency
OffSetFreq value for specific EUTRA frequency.
HO Restrict
Restrict HO for the EUTRA frequency which is configured to HO Restrict = “Enable”.
Small Cell PCI
The lowest PCI value in the PCI range allowed to trigger peer IP address acquisition
Start
procedure for X2 HO when “ANR X2 Trigger = Enable”.
Number of PCIs in the PCI range allowed to trigger peer IP address acquisition
Range
procedure including "start". When set to zero, small cell PCI range is not configured.
ANR Configuration
Enable/Disable triggering X2 setup for the neighbor EUTRA cells acquired via ANR
ANR X2 Trigger
procedure.
Table 12: Basic Configuration Parameter Information
J Plus Proprietary and Confidential 47 / 98
