INSTRUCTION MANUAL
CODE 80189 REV E
12/2020
Page: 50
J
.P. SELECTA s.a.u.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 937 700 877 Fax 34 937 702 362
e-mail: [email protected] - website: http://www.jpselecta.es
The main panel: (batch analysis)
•
General data
: (upper left corner) General batch data.
•
Sample results
: (left side) Results of last sample analysed:
•
Sample Nr
: Number of sample in the batch.
•
Analysis
: Analysis number.
•
Normality
: Number of sample in the batch.
•
Sample weight (mg)
: Sample weight.
•
Reagent (ml)
: Reagent volume consumption on the titration.
•
Nitrogen (mg)
: Detected nitrogen.
•
Protein (%)
: Sample protein contents in %.
•
Batch results
: (upper right table) this table summarizes the batch samples
results.
•
Global batch results
:
(down right corner) results of the batch:
•
Protein % average:
Batch average protein contents.
•
RSD (%):
Relative standard deviation (over average)
The software panels:
The batch panel:
Entry the batch general data on this panel:
•
Lab. Name
: Entry the laboratory name that will appear on the report.
•
Set operator name
: Entry the batch operator name.
•
Protein factor
: Entry the protein factor according to sample type.
•
Sample size
: Entry the quantity of samples that the batch has.
•
Sample
: Choose, using the << and >> keys, the sample and entry the weight
(It can be modified).
•
Weight
: Entry sample’s weight.
Once all samples’ weights are entered, press “OK” to return to the main panel.
