J+J S2, Руководство пользователя

Страница: 8 / 33

HANDBOOK_
J4M SERIES
08
INDEX
When “MAN” function is selected:
1 - The electronic system cuts the power to the motor after a few minutes.
2 - The mechanical connection between the motor and the output shaft is disconnected.
3 - The desired position can be achieved by using the hand wheel.
4 - There are two ways to re-active the motor after being isolated whilst in “MAN” position:
a) Change from “MAN” mode to “AUTO”. Deactivate the supply voltage for a few seconds.
which resets the actuator and it could operate automatically again.
Fig. 7 J4M 2,6 and 10 Fig. 7 J4M 25 and 40
J4M 2, 6 and 10
Hand Wheel
J4M 25 and 40
Position Indicator
Automatic - Manual
and