REV 8-22-19
8
Now the unit can be turned on and programmed.
Programming Instructions:
Coin acceptor:
No programming to acceptor needed if unit was purchased with the standard Imonex Z3 acceptor (8149 JEA part number)
as it is built accept US quarters.
If different acceptor was purchased, see additional literature sent along with unit for programming info.
Once unit has been installed use 5871B8 cap plugs (supplied with unit) to seal holes
in canister bottom located in lower cleanout door. Extra cap plugs are included with
the unit in case plug becomes damaged during shipping removal.
To attach hose, thread
into metal hole
counter clockwise.
Edge of
hose will
need to start
here.
To insert 5871B8 cap plugs into bottom holes, pinch
cap plug into place using index finger and thumb.
With edges of plug resting against edges of hole,
firmly push down on plug with end of hammer or other
blunt object until plug snaps into place.
Содержание 8200
