P
RODUCT INFORMATION
3. Product information
3.1. Proper use
Your product
PROFI 16 TI
is designed for lifting
and lowering loads in the range of the rated load
capacity with a vertically arranged chain.
Your product is also suitable for pulling loads hori-
zontally.
In combination with a trolley, your hoist is also suit-
able for overhead horizontal movement of loads.
Please observe the following national legal provi-
sions. Any other or exceeding use is considered
improper. J.D. Neuhaus GmbH & Co. KG assumes
no liability for damage resulting from this improper
use. The risk is borne solely by the user.
Proper use also includes the observance of the
operating instructions and compliance with the
inspection and maintenance conditions.
3.2. Improper use
Among others, the following are considered im-
proper uses
•
Changing load capacities with the load posi-
tion: Your product is not equipped with a load
capacity display, which is why it may only be
used in such cases where the load capacity
does not change with the load position
•
Exceeding the load capacity
•
Breaking free or towing loads
•
Load the hook at the tip
•
Catching falling loads
•
Transporting people
•
Jog controls
•
For ongoing motion, switch in the opposite
direction
•
Starting lifting and lowering limiter under nor-
mal operating conditions
•
Slide safety coupling after triggering by over-
load
•
In the upper or lower limit position of the load
hook, keep the chain taught in the area of the
central part
•
Transport of changing masses
•
Oblique pulling
Doc.-No.: VA049318-20-OM-EN-0319-64-6
Page
11
of 64
