17
Sterilisation in boiling water
•
All of the components (except for the air tube and the masks) can be immersed
in boiling water for no longer than 1 minute.
Boil the components in plenty of water.
Disassemble all components of the nebuliser and boil them separately.
Maintenance, storage and servicing
•
It is recommended to replace the nebulizer, mouthpiece, nose piece and masks
after 1 year of use.
•
Do not dry the nebulizer in the oven or with a hairdryer or its components may
be damaged.
•
Always check that the filter is clean and replace it immediately if dirty or after a
maximum of 60 days of use. Spare filters are provided with the device.
•
To replace the filter (14), remove the filter cover (2) from its seat.
Remove the used air filter and insert the new filter. Reposition the filter cover in
its seat.
•
Do not use the device without a filter installed. Use only original filters.
•
Do not wash the filter. If the filter is wet, replace it. If the filter is damp it may
cause the device to stop operating.
• Wash the filter cover regularly (do not boil it) then dry it carefully before
repositioning it in its seat.
Never open the compressor compartment.
•
Repairs must be performed exclusively by specialized personnel.
