J. A. Roby volcan b12 vesuve, Руководство пользователя

Страница: 22 / 25

22
Volcan B12- TAAL
WARNING
Note: Taal fireplace can only be installed in the hearth of an operational and
existing gas or wood burning fireplace.
1
Tool required: Drill, measuring
tape, level, pencil, eraser,
Square tip #2 screwdriver,
6 screws of 1½ inches and 4
anchors.
3
From the starting point,
draw a
5
inch horizontal
line on both sides of the
point.
5
If you have a metallic hearth, fix the fireplace with the
self-drilling screws in their designated places aligning
with the four dots you made before.
If you have a stone hearth, fix the fireplace with the
concrete screws in their designated places aligning with
the four dots you made before.
2
Measure the bottom of the
hearth. With a pencil,
draw a point in the middle
of the hearth.
 See figure
F 
4
Draw a 3 ¼ inches vertical line
at both end of the last line. Be
sure to align the center of the
line with the end point of the
last line and mark a dot at both
end of each line.
W = Width
L= Length
Figure E
Figure F