J. A. Roby Chief, Инструкция по эксплуатации

Страница: 7 / 35

July 13, 2017
7
Warmer Assembly (Cook, Cuistot, Cicero
and Chief only)
At this point, you need to know which type of smoke pipe you’ll
use: single wall pipe or double wall pipe.
For the single smoke pipe, it’s not necessary to remove the pre-
cut metal part.
For the double smoke pipe, you must remove the pre-cut metal
part on the top and inside the warmer (1), as well as the
decorative faceplate (2).
1) Open the installation opening at the bottom right of the
warmer by removing the screws (5) and the plate (4)
2) Place and align the warmer with the corresponding
holes on the top of the stove. You will have two bolts on
each extremity (3) and they can be accessed under the
top by the lids. Two other screws are located on each
side of the flue collar (4), and can be access by the collar
or by the round cooking hole for a total of 6 screws
(3&4).
3) Fix the warmer with the lock washers (2) and the nuts(1).