izzy Atlantis IZ-9060, Инструкция по эксплуатации, Страница: 23 / 29

22
Dehumidification function (DRY):
1. Plug in the appliance. A “beep” will sound and the indicator lights on the control panel (1) will
turn on for 1 second and then turn off.
2. The screen (12) will display “
”.
3. Press the power button “ON/OFF” to turn on the appliance. The setting you selected will
appear on the screen and after a while the humidity of the room will be displayed.
4. Press consequently the “MODE” button (20) until the “Dry” indication light (13) will turn on.
5. Press consequently the “-” (18) or “+” (19) buttons to adjust the humidity of your choice (35
to 80 per 5%).
Note: “CO” will appear when you want to set the maximum dehumidification rate and
the appliance to operate continuously.
Note: The percentage of humidity you choose must be lower than the percentage of
humidity in the room. If the humidity percentage you have selected is higher than the
room, then the appliance will not operate.
Fan function (FAN):
1. Plug in the appliance. A “beep” will sound and the indicator lights on the control panel (1) will
turn on for 1 second and then turn off.
2. The screen (12) will display “
”.
3. Press the power button “ON/OFF” to turn on the appliance. The setting you have selected
will appear on the screen.
4. Press consequently the “MODE” button (20) until the “Fan” indication light (14) will turn on.
5. The display (12) will show the following:
Note: In this mode the compressor does not work, and the appliance does not
dehumidify.
Laundry drying function (LAUNDRY):
1. Plug in the appliance. A “beep” will sound and the indicator lights on the control panel (1) will
turn on for 1 second and then turn off.
2. The screen (12) will display “
”.
3. Press the power button “ON/OFF” to turn on the appliance. The setting you have selected