background image

USB Smart Cable

User Manual

UM018115-1016

USB Smart Cable

5

Windows Vista 32-Bit and 64-Bit Systems

1. Connect the USB Smart Cable to the host PC. The 

Found New Hard-

ware

 dialog box should appear.

2. In this dialog, select 

Locate and install driver software (recom-

mended)

. When the User Account Control window appears, click 

Continue

. The Driver Software Installation window is displayed, fol-

lowed by the Found New Hardware-USB Smart Cable dialog box.

3. Select 

I don't have the disc. Show me other options.

4. Select 

Browse my computer for driver software (advanced).

5. Browse to one of the following driver directories:

32-bit Vista systems:

<ZDS II Installation Directory>\device drivers\USB\x32

<ZDS II Installation CD>\device drivers\USB\x32

64-bit Vista systems:

<ZDS II Installation Directory>\device drivers\USB\x64

<ZDS II Installation CD>\device drivers\USB\x64

6. Click 

Next

 to display the Windows Security dialog box.

7. Click 

Install this driver software anyway

.

8. When the software has been installed successfully, click 

Close

.

Windows XP 32-Bit Systems

1. Connect the USB Smart Cable to the host PC. The Found New Hard-

ware Wizard should activate automatically upon connecting the USB 
Programmer for the first time. If you are prompted to connect to Win-
dows Update, click 

No, not at this time

.

Содержание Zilog ZUSBSC00100ZACG













Отзывы: