UM027202-0816
Troubleshooting Tips
S3F8S5A Development Kit
User Manual
11
This Output Checksum message is an example and may not match the actual checksum of
the project for a particular release of the ZDS installation software.
14. To run the application, select
Reset+Go
from the
Debug
menu, as indicated in
Figure 11. As a result, LEDs D2, D3, and D4 will blink in sequence.
Troubleshooting Tips
The following troubleshooting tips are useful when starting the S3F8S5A Ledblink sample
program.
•
Ensure that the LED1 PWR indicator on the S3 Flash ISP II lights up upon connecting
to the USB port of your PC.
•
Navigate to
Project
→
Settings
→
Debugger
→
Debug Tool
→
Setup
. Upon click-
ing
Setup
on the Setup USB Communication dialog box, verify that the S3FlashIspII
serial number is displayed.
Figure 11. Select Reset+ Go from the Debug Menu
Note:
