IXXAT iPC-I 320/PCI II, Руководство по оборудованию

Страница: 13 / 14

Appendix
EMC test in accordance with:
EN 55022:1998 + A1:2000 + A2:2003
(Limit class B)
EN 55024:1998 + A1:2001 + A2:2003
FCC Rules 47 CFR Part 15 – Subpart B
Alternative IEC/CISPR22:1997 + A1:2000
+ A2:2002 (Limit class B)
Device safety: CSA/UL 60950-00 Class 3862 10, 3862 90
4.2 Accessories
4.2.1 CAN bus terminal resistor
To terminate the CAN bus, a Sub-D9 feed-through connector with integrated 120
Ohm bus terminal resistor is available.
Order number: 1.04.0075.03000
Fig. 4-1: CAN bus terminal resistor and internal wiring
4.3 FCC Compliance
Declaration of conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
•
this device may not cause harmful interference, and
•
this device must accept any interference received, including interference that
may cause undesired operation.
Class A digital device instructions:
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are de-
signed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
Copyright IXXAT Automation GmbH
iPC-I 320/PCI II - Manual, Version 1.0
13