General
24
CANio 250 Quickstart Manual, version 1.2
6.4
Note on EMC
This product is a class A device. This means that it is designed for industrial
use and meets the EMC requirements for industrial devices.
If the product is used in offices or residential areas, it may cause radio inter-
ference in extreme cases.
To ensure perfect operation of the device, the following points are to be ob-
served for EMC reasons.
only use the accessories and cables provided
all cables must be shielded
the shield of the interfaces must be connected to the device con-
nectors and the remote station
If problems occur when operating the device despite all the points listed, the
distance between possible sources of interference (e.g. motors, frequency
converters) or susceptible devices (radio receivers) and the device should be
increased.
6.5
FCC Compliance
Declaration of conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received, including interfer-
ence that may cause undesired operation
Class A digital device
– instructions
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment gen-
erates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential ar-
ea is likely to cause harmful interference in which case the user will be re-
quired to correct the interference at his own expense.
