12
®
Tastic
Heat Lamp Replacement
Shield
Heat Lamp
Air Inlet
Socket
Fitting New Heat Lamp
Natural skin oils and salts damage new halogen lamps and shorten their life. Only handle a new heat
lamp with soft, dry, clean, lint-free cloth or paper. You can wear gloves, cover your fingers or wrap the
heat lamp until it is installed (so long as you remove all cloth or paper when finished).
If your skin touches a new heat lamp, wipe it gently it with alcohol-moistened cloth or paper.
The heat lamp is half coated with a white reflector. When you grasp the heat lamp, face the back of
the reflector to the ceiling (so you can see the heat lamp’s filament). Not doing this will reduce
performance.
Fit one end of the heat lamp into a socket and gently push it away from the other socket.
When there is enough room, fit the other end of the heat lamp into its socket.
Gently rotate the heat lamp to ensure it is correctly seated (i.e. it looks like the old one did before you
removed it).
Replace the shield by reversing the directions for removing it.
Switch the power on and test the heat lamp.
