iXBlue OCTANS NANO, Быстрый старт

Страница: 18 / 20

16
2017-04/MU/OCTNANO/AN/004/Ed. A
TROUBLESHOOTING
OCTANS NANO has a Built-In status and error Test (BIT) which raises alarms (through the color of the iXBlue Logo)
and displays messages in the OCTANS NANO User Interface.
If you encounter problems when installing or using OCTANS NANO, please refer to the following table.
If you still cannot resolve the problem, please contact IXBlue support (see previous page).
Symptom Possible causes Solution
Impossible to display the
Web-based User interface Incorrect URL address entered
in the Web browser Type in back the URL address
Default address is 192.168.36.1xx, xx
being the last two numbers of your
OCTANS NANO serial number
Check computer IP address should be in
the same range as the unit.
The URL address has been
changed by another person 1) Retrieve the new OCTANS NANO IP
address: connect the repeater cable to
your PC and start a serial terminal
(HyperTerminal, BBTALK, etc.)
configured at 19200 baud, no parity, 1
stop bit, 8 data bits. Reboot OCTANS
NANO once connected. You will get the
OCTANS NANO boot sequence message
that contains its attributed IP address
(line beginning with “IFCONF”)
2) Enter this URL address in the Web
browser
The compass does not
display on the Web-Based
User Interface Flash player not installed on
the PC or its version is too old Install Flash player which is provided on
the CD-ROM