manualshive.com logo in svg

IWILL ZPCgx, Руководство пользователя

Поделиться
Скачать
IWILL ZPCgx Скачать руководство пользователя страница 64

15

Overview of the System Unit

Rear Component Descriptions

PS/2 Mouse

This port is used to connect a PS/2 mouse.

Serial Port

This port supports serial devices such as serial mouse, PDA
cradle, etc.

LAN Port

This port supports an RJ45 ethernet cable and is used to
connect to a local area network by means of a network hub.

Microphone Jack
This jack is used to connect an external microphone or output
signals from audio devices. Using this jack disables the mic-in

jack at the front panel.

Power Connector

This connector is used to connect a power cord. Power supplied
through this connector supplies power to the system.

PS/2 Keyboard

This port is used to connect a PS/2 keyboard.

VGA Port

This port is used to connect a monitor.

USB Ports
Aside from the 2 USB ports at the front panel, the rear panel is

also equipped with 2 USB ports for connecting additional USB
devices.

Speaker Jack
This jack is used to connect external speakers for audio output
from the system. Using this jack disables the line-out jack at the

front panel.

Содержание ZPCgx









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды