manualshive.com logo in svg

IWILL ZPCgx, Руководство пользователя

Поделиться
Скачать
IWILL ZPCgx Скачать руководство пользователя страница 37

36

User’s Manual

3.3.2  Advanced BIOS Features

Advanced BIOS Features allows you to configure your system for
basic operation. It mainly configures boot options including boot

devices and their boot order and some power functions. Most
entries are defaults required by the motherboard, while others, if

enabled, will improve the performance of your system or let you
set some features according to your preference.

3.3.3  Advanced Chipset Features

Advanced Chipset Features gives you functions to configure the
system based on the specific features of the chipset. The
chipset manages bus speeds and access to system memory

resources. These items should not be altered unless necessary.
The default settings have been chosen because they provide the

best operating conditions for your system. The only time you
might consider making any changes would be if you discovered
some incompatibility or that data was being lost while using your

system.

Содержание ZPCgx









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды