IWILL XP333, Руководство пользователя, Страница: 45 / 68

45
Chapter 4 BIOS Setup
Power Management
This feature allows the user to select the default parameters for
the power-saving mode.
Min Saving:
When idle for one hour,the system enters suspend mode.
Max Saving:
When idle for fifteen minutes, the system enters suspend mode.
User Define(Default Value):
User can specify the time the system enters suspend mode.
PM Control by APM
Set to enabled, an Advanced Power Management (APM) protocol
will be activated to handle the power-saving mode.
[NO(Default Value),Yes]
MODEM Use IRQ
This indicates which IRQ a MODEM is using.
[NA, 3 (Default Value),4,5,7,9,10,11]
Video Off In Suspend
This determines the manner in which the monitor is blanked.
[NO , Yes (Default Value)]
Video off Method
V/H SYNC+Blank (Default Value):
Turn off the vertical and horizontal synchronization ports and
write blanks to the video buffer.
Blank Screen:
Write blanks to the video buffer only.
DPMS:
Initial display power management signaling with DPMS.
HDD Power Down
This field specifies the amount of time after which the system
powers down the Hard Disk Drives. It is available only when the
Power Management field is set to User Define.
[Options: 1-15Min, Disabled(Default Value)]