IWILL P55XPLUS, Руководство пользователя

Страница: 48 / 69

48
X s u l P
T M
C,A System will first search for hard disk drive then floppy disk drive.
A,C System will first search for floppy disk drive then hard disk drive.
CDROM,C,A System will first search for CDROM drive, then hard disk drive
and then floppy disk drive.
C,CDROM, A System will first search for hard disk drive , then CDROM drive,
and then floppy disk drive.
Swap Floppy Drive
This item a llows you to determine whether ena ble the swa p floppy drive or not.
The choice: Ena bled/Disa bled.
Boot Up Floppy Seek
During POST, BIOS will determine if the floppy disk drive installed is 40 or 80 tracks.
360K type is 40 tracks while 760K, 1.2M and 1.44M are all 80 tracks.
Enabled BIOS searches for floppy disk drive to determine if it is 40 or 80
tracks. Note that BIOS can not tell from 720K, 1.2M or 1.44M drive
type as they are all 80 tracks.
Disabled BIOS will not search for the type of floppy disk drive by track
number. Note that there will not be any warning message if the drive
installed is 360K.
Boot Up NumLock Status
This allows you to determine the default state of the numeric keypad. By default, the
system boots up with NumLock on.
On Keypad is number keys
Off Keypad is arrow keys
Boot Up System Speed
Selects the default system speed -- the normal operating speed at power up.
High Set the speed to high
Low Set the speed to low
Gate A20 Option
This entry allows you to select how the gate A20 is handled. The gate A20 is a device
used to address memory above 1 Mbytes. Initially, the gate A20 was handled via a pin
on the keyboard. Today, while keyboards still provide this
support, it is more common,
and much faster, for the system chipset to provide support for gate A20.
Normal keyboard
Fast chipset