IWILL P4G Series, Руководство пользователя

Страница: 38 / 110

P4G Series Motherboard
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 2•24
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Jumpers
There are five jumper switches on this motherboard.
Jumpers function like switches to establish a hardware
configuration setting.
JCMOS1 Clear CMOS
Function: Clears the CMOS Setup Utility configuration
record stored in the real-time clock’s CMOS memory.
Description: A 3-pin jumper. Default Setting: Normal.
More Information: See Chapter 3 for configuration in-
formation and the Troubleshooting section in Chapter 6.
JDIMMVOLT1 DDR Voltage
Function: Sets the voltage supplied to the DIMM DDR
memory sockets.
Description: An 8-pin jumper. Default Setting: 2.5V.
More Information: See Chapter 3 for configuration in-
formation and “System Features” in Chapter 6.
JUSBV1 USB Standby Voltage
Function: Sets the voltage status for the USB ports.
Description: A 3-pin jumper. Default Setting: 5V
More Information: See Chapter 3 for information on con-
figuring this jumper.
JPSKMV1 PS/2 Standby Voltage
Function: Sets the voltage status for the PS/2 ports.
Description: A 3-pin jumper. Default Setting: 5V.
More Information: See Chapter 3 for information on con-
figuring this jumper.
J2 Onboard Serial-ATA
Function: Enables and disables the onboard Serial-ATA
controller and sets the data transfer rate.
Description: An 8-pin jumper, uses two jumper caps.
Default Setting: Enabled & 133MB/sec.
More Information: See Chapter 3 for information on con-
figuring this jumper.
JDIMMVOLT1
JUSBV1
JPSKMV1
JCMOS1 Clear CMOS:
Default – Normal
JDIMMVOLT1
DDR Voltage:
Default – 2.5V
JUSBV1 USB Voltage:
Default – 5V
JPSKMV1 PS/2 Voltage:
Default – 5V
Pin 1
Pin 8
Pin 7
Pin 2
Pin 1
Pin 1
Pin 1
JCMOS1
J2:
Default –
Enabled & 133MB/Sec
J2
Pin 1
Pin 2
Pin 7
Pin 8