29
3.3.4 Drive A / Drive B
This field specifies the traditional type of the floppy drives.
Options
Description
None
No floppy drive is connected
360K, 5.25 in.
A 360K floppy drive is connected
1.2M, 5.25 in.
A 1.2M floppy drive is connected
720K, 3.5 in.
A 720K floppy drive is connected
1.44M, 3.5 in.
A 1.44M floppy drive is connected
2.88M, 3.5 in.
A 2.88M floppy drive is connected
3.3.5 Floppy 3 Mode Support
3 Mode floppy drive is a kind of 3.5 inches drive, which is used at NEC PC98 computer. It supports
1.2M and 1.44M format with the same drive. This field specifies which drive 3 Mode is supported.
When a floppy drive is specified to support 3 Mode, the respective drive setting in “Drive A / Drive
B” field will be invalid.
Options
Description
Disabled
No 3 Mode drive is connected
Drive A
A 3 Mode drive is connected as drive A
Drive B
A 3 Mode drive is connected as drive B
Both
Both drive A and drive B are 3 Mode drives
3.3.6 Video
This field specifies the type of the graphics adapters used for the primary system monitor.
Options
Description
EGA/VGA
Specifies EGA or VGA adapter
CGA 40
Specifies CGA adapter with 40 column mode
CGA 80
Specifies CGA adapter with 80 column
MONO
Specifies Monochrome adapter
3.3.7 Halt On
This field specifies the failure event, which should halt the system if occurred.
Options
Description
All Errors
When the BIOS detects a non-fatal error, the system will stop
and you will be prompted
No Errors
The system will not stop for any error that may be detected
All, But Keyboard
The system will stop for any errors except keyboard error
All, But Diskette
The system will stop for any errors except diskette error
All, But Disk/Key
The system will stop for any errors except diskette and
keyboard errors
