IWILL kv200, Руководство пользователя

Страница: 88 / 156

8 8
Chapter 5 IDE RAID Setup
There is no default setting for this field. You
must select the drives for the configured
array. When this field is selected, a pop-up
window displays all the available physical
drives with check-boxes. Use the arrow
navigation keys and press the Spacebar to
select or deselect the drive or drives to be
part of the array. Press <Enter> when
done. If you select mirror mode as the array
type, you must select two drives to be in
the array.
r e t s a M y r a m i r P ] [
e v a l S y r a m i r P ] [
r e t s a M y r a d n o c e S ] [
e v a l S y r a d n o c e S ] [
5.3.5.5.3Stripe Size
Stripe size field applies to stripe mode
arrays only. By default, an array is set up
with 64 KB stripes. Edit this field to change
the default stripe size.
Note: You cannot
change the stripe size of an array that
has already been configured.
5.3.5.5.4Bootable