41
3.6.2 PM Control by APM
When enabled, an Advanced Power Management (APM) protocol will be activated to handle the
power saving mode.
Options
Yes (*)
No
3.6.3 Video off Method
This field specifies the method that video subsystem used for power saving.
Options
Description
V/H SYNC+Blank (*)
Turn off the vertical and horizontal synchronization ports and
write blanks to the video buffer
Blank Screen
Writes blanks to the video buffer only
DPMS
Initial display power management signaling with DPMS
3.6.4 Video Off After
This field specifies the power saving mode, which will shut off the video.
Options
Doze / Standby (*) / Suspend / NA
3.6.5 MODEM Use IRQ
This field specifies the IRQ channel for MODEM used.
Options
3 (*) / 4 / 5 / 7 / 9 / 10 / 11 / NA
3.6.6 Doze Mode
This field specifies the timer value of Doze Mode. It is available only when the Power
Management field set to User Define.
Options
1 Min / 2 Min / 4 Min / 8 Min / 12 Min / 20 Min
30 Min / 40 Min / 1 Hour / Disable
3.6.7 Standby Mode
This field specifies the timer value of Standby Mode. It is available only when the Power
Management field set to User Define.
Options
1 Min / 2 Min / 4 Min / 8 Min / 12 Min / 20 Min
30 Min / 40 Min / 1 Hour / Disable
