3-31
do not save your values before you exit the BIOS Setup Utility, all your
changes will be lost.
If after making and saving system changes with the BIOS Setup Utility, you
discover that your computer is no longer able to boot, the AMI BIOS supports
an override, which will reset your system to the Failsafe defaults. If that fails,
it is possible to manually clear the present CMOS information through the
"Clear CMOS Header" on the motherboard (Refer to Jumper Settings for
more information).
The best advice is to ONLY alter settings which you thoroughly understand.
The default settings have been carefully chosen by AMIBIOS to provide the
maximum system performance and reliability. Even a slight change to the
chipset setup may cause potential and unpredictable failure to the system.
