iWeld POCKETMIG 205 DSC, Руководство пользователя

Страница: 27 / 36

2-3. Checking
1. Make sure the machine is properly grounded!
2. Make sure that all connections are perfect, especially grounding of the machine!
3. Check that the electrode cable connection to be perfect!
4. Make sure that the polarity is correct outputs!
5. If you choose circuit protection (VRD), the no-load voltage is 22V.
6. Welding spatter can cause a fire, so make sure there are no flammable materials
the work area!
3. Operation
3-1 Control Panel Functions
EN
1 1 Data selection button (menu)
Select the welding mode, MIG, MMA and Lift TIG welding
2 Multifunctional data adjusting knob
Coarse adjustment by pressing and turning the knob.
Multifunctional data adjusting knob - coarse adjustment by pressing the knob
and turning it, the regulating range is big and speed is high; fine adjustment
by turning the knob only:, the regulating range is small and speed is low.
3 Welding mode switch key.
Select the welding mode as MMA, TIG, MIG (CO2) and MIG (MIX).
4 Multifunctional data display
1
2
3
4
27