iWeld MIG 500 DIGITAL, Руководство пользователя

Страница: 51 / 58

HU
EN
● Select the diameter of welding wire. Rotate the left knob to DIAM and right knob to
1.2, as shown in the following figure:
● Select the operating mode of welding torch. Rotate the left knob to TRIG and right
knob to 2T, as shown in the following figure:
The following parameters can also be adjusted in the MENU: Gas pre-flow time (GPR),
gas post-flow time (GPO), burn-back time (BURN), slow feeding speed (FDC), and
slow feeding time (FDT). These parameters
● Adjust the current and arc length value. Press S1 key to select current A and rotate
the knob A to adjust the current; press S1 key to select arc length and rotate the
knob K to adjust the arc length, as shown in the following figure:
13