iWeld MIG 251 DIGITAL, Руководство пользователя

Страница: 43 / 52

EN
2-4. Checking
1. Whether the machine is connected to standard to earth.
2. Whether all the connections are well-connected. (esp. that between the earth clamp and the
work piece)
3. Whether the output of the electrode holder and earth cable is short-circuited.
4. Whether the pole of the output is correct.
5. The welding splash may cause fire, so make sure there is no flammable materials nearby.
2-3. Connect the wire feeder
1. The long axis of the wire feeder lock the wire roller that specific wire. Make sure that
the wire roller is suitable for the wire used!
2. Wire should roll down clock wise, then cut the line, off-stage, it is only after pinning it
on!
3. Tighten the hold-down screws on the wire, put the wire into the wire feed guide
wheel and thread the wire to the welding torch.
4. Press the button on the wire feeder to the welding torch into the wire.
1. Current adjustment button
2. Arc trait adjustment button
3. MMA/MIG switch button
4. 2T/4T switch button
5. Abnormal indicator
6. Current meter
7. Voltage meter
8. Voltage adjustment button
9. Positive output terminal
10. Negative output terminal
11. Polarity conversion joint
12. Torch joint
3. Operation Instructions
3-1. Front panel layout
1
6
2
3
4
5
7
8
9
10
11
12
43