iWaveOcean Caerberus, Руководство пользователя

Страница: 8 / 15

8
Figure 7: tightened connector on the
Canister
Figure 8: moving of the lever switch on
the Canister
HOW TO TURN CAERBERUS ON
To turn the product on, make sure that the cable connector of
CAERBERUS head is correctly inserted and screwed onto the Canis-
ter (see photograph 7). It is important to remember that water may
enter the product if the connector is not fitted properly.
After checking the wire, use the lever switch on the upper part of
the Canister (see lever switch moving details in picture 8) to turn
the CAERBERUS torch on at maximum power.
HOW TO SELECT THE “ON” MODES
CAERBERUS torches automatically go into MAX mode, with 3 LED
on, when turned on.
To use the MED/MIN modes, reducing the beam of light, move the
slide switch on the back of the CAERBERUS torch head: by moving
the slide switch to the right for more than one second (see picture
9), the Toggle is activated, enabling alternative illumination of the
single central LED or the two aside LED. Each movement of the
slide switch to the right corresponds with a sequence of MED and
MIN mode.
CAERBERUS WITH iWO CORD
For the version with iWO cord, never enter the water with the
iWO connector unplugged and with voltage ‘ON’. Always ensure that
blue light is ‘OFF’ before unplugged the connector underwater. This is
important to avoid electrolytic corrosion on the electrical contacts.