Page 9 of 21
iWave Systems Confidential.
Telematics Control Unit Product User Manual
2.4
Battery Removal Procedure
Remove the battery from the slot as highlighted in Figure 6
Figure 6 : Procedure to Remove Battery
2.5
Procedure to close the enclosure
Place the board as shown in the image (1) of Figure 7
Close the enclosure.
Figure 7: Procedure to close the enclosure
2.6
Powering the device through Y-Cable
Place the board and Connect the Y cable as shown in image (1) and image (2) of Figure 8
Connect one end of the Y cable to the Power connector board as shown in the image (3) of Figure 8
Provide power supply to the power connector board as shown in the image (4) of Figure 8
Figure 8: Procedure to power on the device using Y cable
1
2
3
1
2
3
4
