iW
-RainboW
-G28D
iW
-RainboW
-G28D
Command Prompt(Linux)
11
Step 6 - Test Environment setup
Once power is applied to the Development Platform as
explained in the previous section, boot messages being
displayed in the debug terminal of the PC/Laptop which is
connected to the Development platform. Press any key in
terminal immediately to see the command prompt of the Boot
loader or wait until OS boots.
iWave supports below mentioned Operating System Releases
for iW-RainboW-G33D i.MX8M SMARC Development Platform.
Linux 4.9.51 (or higher)
Android Pie 9.0 (or higher)
After OS boots, Login prompt being displayed in the debug
terminal and enter password as “root” to get the Linux
command prompt as shown below.
iW-RainboW-G33D
03
10
