Power-ON the Development Platform
Connect the 12V power supply plug to the power connector
(J26) of the Development Platform as shown below and switch
ON the power supply.
Warning :
1. Do not try to connect any other power supply other than supplied
along with the Development Kit.
2. Do not plug or remove the i.MX8M SMARC SOM from carrier
board with live power.
3. Contact iWave if power LEDs are not glowing.
Once power is applied to the Development Platform, the power
LEDs in the i.MX8M SMARC SOM and carrier board will glow as
shown in the below image.
10
Quick Start Guide
03
09
