5
Self-Labeling Name Change
You can manually change the name of a key on the
display. This does not change the function of the
key, only how it appears on your display.
Note:
If you change the label on a key and that key
assignment is changed, the label you assigned to
that key will not change. You cannot change the
name of a Press Page key.
To change the name of a key on the display
1.
Press and hold for five seconds
the key that
corresponds to the label you want to change.
2. When the Label Name Change screen appears,
use the dial pad and the navigation keys to enter
the new name for the key.
3. Press
Save
to save your changes or
Cancel
to
exit the name change without saving.
Return a key label to its default name
If you have changed the name of the key and wish
to return the key name to its default setting:
1.
Press and hold for five seconds
the key that
corresponds to the label you want to return to
the default name.
2.
Delete
the key name, press
Save
without enter-
ing a new name.
3. The default key label is now displayed.
From the Setup menu you can pair a
Bluetooth
headset, login using the
station profile feature
,
change the
LCD contrast
, activate an
Iwatsu tick-
er (TFD
), and perform station programming through
the
User Options
selection. The Setup menu can
only be accessed while the phone is in the idle
mode.
Setup Menu
-
,
.
,
&
,
/
,
0
[space]
,
@
,
1
0
2
ABC
5
JKL
8
TUV
#
3
DEF
6
MNO
9
WXYZ
1
*
4
GHI
7
PQRS
[
,
]
,
_
,
!
,
*
(
,
)
,
?
,
,
,
#
a
,
b
,
c
,
2
d
,
e
,
f
,
3
g
,
h
,
i
,
4
j
,
k
,
l
,
5
m
,
n
,
o
,
6
p
,
q
,
r
,
s
,
7
t
,
u
,
v
,
8
w
,
x
,
y
,
z
,
9
SETUP MENU
26
Direct Inward System Access (DISA) allows an
external caller to access Iwatsu system features
from outside the office. Feature operation for DISA
calls is the same as those for the Single Line Tele-
phone. Certain DISA features, including making an
outside call and system paging access require a
security password.
Note:
DISA must be enabled in the system. Check
with your system administrator.
Operation
1. When the phone system answers, the caller will
hear either a message or a special DISA dial
tone.
To Interrupt the Message
1. Press
#
+
#
. You will hear DISA dial tone.
To make an intercom or hunt group call
1. Dial the desired extension number or hunt group
access code.
To access all DISA features
Dial
#
+
#
.
Dial
*
.
Dial the assigned password. You will have the
calling capabilities assigned to the DISA line, or,
dial an extension number followed by that exten-
sion’s Station Restriction Password. You will
have the same calling capabilities as that exten-
sion.
Wait for the intercom dial tone.
Dial the desired extension number, hunt group
access code, paging access code or outside line
access code and phone number.
To register a flash to make another call
1. Dial
#
+
#
.
2. Once an outside call has been made, another
call may not be placed.
DIRECT INWARD SYSTEM ACCESS
There are two jacks on the back of your Iwatsu
ICON
Series 5930/5910 IP Phone. One jack is
labeled “PC” and the other is labeled “LAN”. Use
the PC jack to connect to a second device.
To use the layer 2 switch
1. Connect on Category 5 cable from the PC jack
on the IP telephone to the NIC card on your
PC.
2. Connect one Category 5 cable from the LAN
jack on the IP telephone to the wall jack con-
nected to the local area network.
LAYER 2 SWITCH
