27
Refer to the Setup Menu section on page 6
for
Bluetooth Discover (Pairing), Connect, and Discon-
nect procedures.
Disclaimer:
The compatibility and performance of
any Bluetooth headset not manufactured by Iwatsu
is “As is” and is not supported, warranted, or guar-
anteed by ICON Voice Networks in any manner,
and ICON Voice Networks hereby disclaims any
and all implied warranties of merchantability and
fitness for a particular purpose.
Bluetooth Operating Conditions
If
Bluetooth
does not appear on your LCD when
you press the
Setup
key, your telephone is not
equipped with a Bluetooth module.
Only one Bluetooth headset can be paired to a
telephone at a time. A second device will over-
write any previously paired Bluetooth headset.
For convenience and visibility, Iwatsu recom-
mends adding a
Headset Control Key
to your
key pattern.
If
Unknown
appears on the display during the
Bluetooth Discovery process, it is possible that
the Bluetooth Name Check Response Timer has
timed out before the headset name was re-
ceived. In most cases, the Bluetooth device will
pair successfully. You can choose to re-discover
the Bluetooth device if the name does not ap-
pear on your display.
Bluetooth Environmental Conditions
The following environmental conditions will have an
effect on the operation of Bluetooth headsets and
must be taken into consideration:
Number of Bluetooth devices within a 10 meter
radius of the Bluetooth enabled Iwatsu ICON
Series telephone.
Number of WiFi devices within a 10 meter radius
of the Bluetooth enabled Iwatsu ICON Series
telephone.
Distance of the Bluetooth headset from the Blue-
tooth enabled Iwatsu ICON Series telephone.
Note:
When the Motorola H550 headset is taken
out of range and then returned within range of the
paired key telephone, the H550 headset LED will
flash red and you will hear a beep approximately
every 30 seconds. To clear this state, power the
headset off and then on and wait for the headset to
reconnect .
BLUETOOTH CONDITIONS
4
Receiving an Incoming Call
When your phone rings and lamp flashes press the
Speaker
key or lift the receiver to connect the call.
If your phone does not connect you to the call
automatically
when your phone rings and lamp
flashes lift the receiver and press the key with the
flashing lamp to connect the call.
Save Dialed Number
1. While speaking on an outside line press the
Feature
key and dial
2
+
1
, or, press the
Save
Dial
key (if assigned).
2. You will hear a confirmation tone that indicates
the phone number you just dialed has been
saved.
To dial the saved number
1. Lift the receiver, press the
Feature
key and dial
2
+
1
, or, press the
Save Dial
key (if assigned).
2. The saved number is automatically dialed.
Transferring a Call to Another Extension
When speaking on an outside line:
1. Press the
Transfer
key.
2. When you hear dial tone dial an extension
number, or, press an extension key.
3. Announce the call when the extension answers
and hang up, or just hang up.
The Iwatsu ICON 5930 phone is equipped with 30
self-labeling keys and the 5910 phone is equipped
with 10 self-labeling keys. Self-labeling keys are
used to manage calls and access Iwatsu ECS
system features. When a key is changed on the key
pattern of your phone, the label will change.
5930/5910 Self-Labeling Display Navigation
To navigate the Self-Labeling display use the
Next
Page
and
Previous Page
keys to access page 1
and page 2 on the display. The
Setup
key is used
to access station profile login, Bluetooth setup, LCD
contrast, Iwatsu ticker, and user options.
SELF-LABELING DISPLAY
