Fine-Line Spray (AR, BR, BCR, CR)
1. Depress the main lever (#6) to start airflow.
2. Position the airbrush close to the surface, between 1/16
and 1/2 inch is common.
3. Pull the main lever back slightly to start the flow of paint.
Line thickness can be controlled by adjusting the distance
between the airbrush and the surface and also by varying
the paint flow by manipulating the main lever’s position.
An extremely narrow line can be obtained by carefully
removing the needle cap (#1) and positioning the airbrush
closer to the surface.
CAUTION: The needle and nozzle are very delicate.
Even a slight bend on the tip of the needle can
adversely effect the spray pattern.
Fine-Line Spray (SAR)
1. Depress the main lever (#7) to start airflow.
2. Position the airbrush close to the surface, between 1/16
and 1/2 inch is common.
3. Unscrew the fluid adjustment knob (#15) slightly to start
the flow of paint.
Line thickness can be controlled by adjusting the distance
between the airbrush and the surface and also by varying
the paint flow by manipulating the fluid adjustment
knob’s position.
Wide-Line and Background Spraying (AR, BR, BCR, CR)
1. Depress the main lever (#6).
2. Position the airbrush further away from the surface, from
1/2 to 6 inches is common.
3. Pull the main lever back much farther releasing more paint
to cover the bigger area.
Increase the distance between the airbrush and painted
surface to control the line’s width. Increasing the air pressure
will also effect the spray width. The Revolution’s maximum
usable line width is approximately 2-1/2 inches.
GENERAL OPERATION
8
Содержание Revolution HP-AR
Страница 1: ......
Страница 15: ...15 ...
Страница 16: ...16 ...
Страница 19: ...part no IR 102 rev5 4 16 w w w I W A T A A I R B R U S H c o m ...