Iwata Revolution HP-AR Скачать руководство пользователя страница 18

Страница: 18 / 19

All Iwata airbrushes are

Warranted

against all manufacturing defects of material and manufacture

or workmanship for a period of FIVE years from date of purchase. This warranty does not cover needles,

nozzles, o-rings and internal packings since these parts need to be replaced occasionally due to normal

wear. Any other parts or materials that are or become defective so as not to be usable within this period

will be repaired or replaced. This warranty does not cover damage caused by negligence or airbrushes

which have been altered or abused in any way. Call or e-mail Iwata-Medea before returning an airbrush

for the appropriate procedure for warranty repairs.

Power Jet Pro™, Power Jet Lite™, Medea Super Lube ™, Pistol Grip Filter™, and all products denoted with ® or ™ are registered trademarks or trademarks of Iwata-Medea Inc. • Iwata® and the

Iwata logo are registered trademarks of Anest Iwata Japan. For more information visit

www.iwata-medea.com

Genuine Iwata

Содержание Revolution HP-AR




















Результаты поиска

Содержание Revolution HP-AR

Отзывы:

Бренды по названию

Популярные бренды

Iwata Revolution HP-AR, Руководство по эксплуатации и каталог запасных частей

Результаты поиска

Содержание Revolution HP-AR

Отзывы:

Бренды по названию

Популярные бренды