Iwata Full Finish G-Series G3, Руководство по эксплуатации

Страница: 9 / 16

Cleaning
Cleaning Between Colors
1. Replace the color bottle with a bottle containing the appropriate
cleaning solution (when using the G6 Bottle Set). Rinse out metal
cup and fill with cleaning solution.
2. Spray until the solution sprays clear and clean.
3. Remove the bottle of cleaning solution (when using the G6
Bottle Set). Dump out remaining solution from metal cup.
4. Spray air until it sprays dry.
5. Fit a color bottle with the new color and spray or add new color
to metal cup.
6. Repeat the procedure when finished.
Before Each Session
Spray water, or appropriate solvent, through the airbrush-gun to
ensure it is in proper working order.
NEVER soak your entire airbrush in any liquid. NEVER
store your airbrush with spray medium or cleaning
agents in the fluid cup.
After Each Session
Or any time the airbrush-gun becomes clogged:
1. Increase the air pressure.
2. Spray cleaning solution through the airbrush-gun for a short
time.
3. Unscrew the fluid adjustment knob (#22).
4. Remove the spring (#21).
5. Pull out the needle (#5).
6. Wipe down the needle.
7. Gently reinsert the needle. NOTE: The needle is delicate and
sharp. Be careful not to bend the tip of the needle or hurt
yourself while reinserting it.
8. Place the spring on the needle.
9. Screw the fluid adjustment knob onto the airbrush-gun.
The higher air pressure will help to thoroughly clean out the paint.
MAINTENANCE
9
CAUTION
WARNING