background image

MAINTENANCE

Cleaning the Airbrush Between Colors

1. Dump out the color cup’s excess paint.

2. Rinse the cup with the appropriate cleaning solution.

3. Use a paper towel to wipe out any leftover paint.

4. Fill the bottom of the cup with cleaner.

5. Spray cleaner until the spray is clear.

6. Add the next color to the color cup.

7. Repeat cleaning procedure when finished.

Cleaning the Needle

1. Unscrew the handle (#11) from the airbrush body.

2. Loosen the needle chucking nut (#10).

3. Gently pull the needle (#9) straight out.

4. Fold a soft cloth damp with cleaner over the needle.

5. Rotate the needle to gently wipe the residual paint off.

6. Carefully insert the needle into the airbrush until it seats fully 

    against the nozzle (#1C). You should feel a positive stop. If you          

feel a spongy stop, you still have debris in your nozzle.

CAUTION: The most probable time to damage the needle is 

when the needle passes through the main lever (#13) and 

through the needle packing screw (#4).
If the needle stops abruptly, retract and examine the trigger 

mechanism for proper assembly and re-insert the needle.

7. Tighten the needle chucking nut finger tight.

 

Pull the main lever back and forth to visually confirm the 

 

needle’s ability to move.

8. Screw the handle back onto the airbrush body.

Before Each Session

Spray water or the appropriate paint solvent through the airbrush 

to make sure the airbrush is working properly.

After Each Session

Or any time the airbrush becomes clogged

1. Increase the air pressure.

2. Spray cleaning solution for a short time.

3. Clean the needle if necessary

This cleaning method helps clean the paint passage, the nozzle, 

and the needle thoroughly. 

12

Содержание Custom Micron B





























Отзывы: