V. Security Rules
1. Part-time workers and unauthorized repairmen are forbidden to repair or
revise the unit’s components as it will void the warranty.
2. Do not operate with wet hands to avoid electric shock.
3. If power lines are aging and knotted or the plug is damaged, they should be
repaired by the authorized service center immediately.
4. Do not clean, maintain and move the air cooler when the power supply is
connected.
5. Pull out the power plug when the air cooler is not going to be used for a
period of time.
6. Do not insert foreign matter into the air inlet/outlet; otherwise, it will
damage the air cooler.
7. Do not use the air cooler in an inflammable and explosive environment or
direct sunlight.
8. Do not put the air cooler in an inclined or unbalanced position to avoid the air
cooler from falling down, which can be detrimental to the air cooler or the
components inside the unit.
9. When the water tank is full of water, do not lay the unit on its side or bump it
with other objects when moving it. If you intend to move the air cooler, push it
slowly and gently from the side. Please do not overfill with water.
10. Do not turn the unit upside down at anytime.
11. Do not cover the air outlet or inlet.
12. When cleaning the surface of the air cooler, use a damp cloth (detergent can
be added) and do not use corrosive detergent or solution. Do not use water to
rinse the motor or internal circuit boards.
13. Do not block the air inlet/outlet with the wall, curtain or other objects;
otherwise, it will block the airflow, thereby affecting the air supply efficiency.
14. Please change the water supply regularly.
VI. Cleaning and Maintenance
Reminder: Over a long period of running, the wind capacity and dust
removing effects of the filter screen and cooling pad are going to
deteriorate because of dust. So it is recommended to clean them
regularly.
1. Cleaning the air filter
Cut off the power supply and unscrew the unit using a screwdriver
and then the filter screen can be dismounted. Use mild detergent and
brush to clean the filter and wash it with clean water, Make sure that
the filter is completely dry before re-installing it to the unit.
2. Cleaning the cooling pad
Cut off the power supply and remove the air filter screen in order to
take out the cooling pad from the back cover. Use a mild detergent
and brush to clean the cooling pad, wash it with clean water and
finally, dry it.
