I. Functions
Note: the instruction describes all the functions. The users can choose
them according to the actual product function.
On/off: when the unit is on standby, press the
“
on
”
button and low
wind speed is set as default with the ionizer in working state; Press
the “off” button, the fan stops working, and all lights go out and the
fan is on standby.
Wind speed/shift: in the working state, wind speed can be regulated
by pressing the button; if the button is pressed repeatedly, air supply
mode can be chosen between three modes: high- medium-low.
Swing: in the working state, horizontal automatic swing function can
be activated by pressing the button; but the swing function will be
halted when the button is pressed once again.
Cooling: In the working state, pressing the button means start of the
cooling function, and when pressing it again, the cooling function
ceases.
Timer: in the working state, if the button is pressed, timer can be
activated and if pressed repeatedly can be adjusted as follows:
→
1hour
→
2hours
→
3hours up to 12 hours.
Natural wind: in the working state, the natural wind mode can be set
by pressing the button. When pressing it again, the natural wind mode
can be stopped while the wind speed will shift into low speed. (The
wind speed is void in the natural wind mode)
Sleep button; In the working state, the sleep mode can be set by
pressing the button. When pressing it again, the sleep mode can be
ceased while the wind speed will shift into low speed.(The wind
speed is void in the sleep mode)
Ionizer: In the working state, press the button and the ionizer will
turn off; press the button again and the ionizer will turn on.
Water shortage protection: If water level is not sufficient, the pump
will immediately stop, the buzzer turns on, light will turn on to signify
water shortage.
Note: Unplug the unit before adding water.
Attention:
Keep the unit out of children’s reach
. Always have an adult to
supervise the children whenever they operate the unit.
Ensure that the power supply is disconnected when moving and
cleaning the unit.
