6
remove the insulating strip from the remote control
Remove the insulating mylar strip from the battery
if the battery is being used for the first time. It is located at
the bottom rear side of the remote control.
handling the battery
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which
could cause fire, personal injury or damage to property.
• Install the battery correctly in the battery compartment. Normally the battery’s positive
polarity (+) will face up.
• When the battery is exhausted, the remote control will not function.
• Only use the battery type indicated in this manual.
• Do not dispose of the used battery as domestic waste. Dispose of it in accordance with
local regulations.
• Small button cell batteries such as the one used in the remote control are easily
swallowed by young children and this is dangerous. Keep loose button cells away from
young children and make sure that the battery is secure in the remote control. Seek
medical advice if you believe a battery cell has been swallowed.
2. Pull out the battery holder and remove the old battery.
battery replacement for the remote control
The remote control requires a CR2025, 3V Lithium battery.
1. Using a paperclip, carefully pry open the battery release
tab in the direction of the arrow.
3. Replace with a new battery.
4. Insert the battery holder back into the remote control.
iPH1212_IB_121029_Michelle.indd 6
29/10/2012 12:18 PM
