11
basic operation
Each enabled stage will be clared in approximately 8 seconds if you do not press any button.
powering ON/OFF
When you first connect the unit to the mains socket, the unit will be in standby mode.
1. Press STANDBY on the unit or the remote control to switch on the unit. The LCD
display will show the Clock.
2. Press STANDBY to switch the unit back to standby mode.
3. If you want to turn off the unit completely, unplug the mains cable.
If there is no sign under the DOCK, LINE IN or Bluetooth mode, or volume is muted
for 15 minutes, it will automatically switch to STANDBY mode.
selecting modes
• Ensure the unit is in Standby mode before selecting a function.
• Use either SOURCE on the unit, or DOCK/LINE IN, FM, on the remote control to select a
function. The functions will cycle through the following sequence:
FM
BT
iPod
LINE
adjusting the volume
• Press / – to adjust the volume.
• If you wish to turn the sound off, press MUTE on the remote control. Press MUTE
again or press / – to resume normal listening.
setting the clock
1. In Standby mode, press and hold CLOCK on the unit or CLOCK/PROG on the remote
control until 24H on the LCD display starts flashing.
2. You can choose between a 12 hour or 24 hour clock. Press or on the unit, or or
on the remote control.
3. Press CLOCK on the unit or CLOCK/PROG on the remote control to confirm the clock
format.
4. When the HOUR digits flash, set the hour using or on the unit, or or on the
remote control.
5. Press CLOCK on the unit or CLOCK/PROG on the remote control to start the MINUTE
digits flashing.
6. Set the minutes using or on the unit, or or on the remote control.
7. Press CLOCK on the unit or CLOCK/PROG on the remote control to confirm the Clock
setting.
iCRIPBT12_IB_RC_120926_Zell.indd 11
26/9/12 10:49 AM
