7
FM operation
selecting FM mode
Press the
SOURCE
button repeatedly until you have switched to FM mode.
searching for a station automatically
To search for an FM station, press and hold the button. The unit will start scanning up
the frequency band. To scan down the frequency band, press and hold the button. Once
a station has been found, scanning will stop automatically.
If no station is found, then the tuning will stop once it has cycled through the entire FM
band (87.5-108MHz).
searching for a station manually
To search for FM stations manually, simply press the buttons repeatedly until your
desired frequency is reached.
for better reception
Fully unwind the FM aerial. Extend the FM aerial and place it in the position that offers the
best sound reception.
The unit will automatically switch between stereo and mono. This is helpful when signal
reception is poor.
presetting stations
You can store up to 20 of your favourite stations to the preset stations. This will enable you
to access your favourite stations quickly and easily.
1. To programme a preset station, you must first be listening to the station that you
would like to save, then press and hold the
STORE
button.
2. Press the buttons to select your desired preset station number.
3. Press the
STORE
button once more to confirm the selection.
recalling a preset station
1. Once you have saved a station, you can recall it by pressing the
RECALL
button.
2. Press the buttons to select your desired preset station number.
Unplugging the mains adapter will erase the all preset memory.
iCRIP12_IB_120508_Zell.indd 7
08/05/2012 3:00 PM