28
Pump mounting
Wall mounting
Ŷ0RXQWLQJ
Select a suitable place.
Select a rigid vertical wall on which the pump is mounted. Use the anchorage points guide (see page
87) and drill four holes to have your M6 anchor nuts.
Remove the six (6) M4 screws and the detachable pump base.
8VHIRXU0DQFKRUEROWVDQG¿[WKHSXPSEDVHRQWR
the vertical wall.
The pump base have a mounting direction, the push mark upward.
Hang the pump onto the pump base.
The inverted triangles on the base shows the
location where the pump is to be hooked.
Slide in the attached mounting adapter to the upper side
of the base.
Check the pump is held vertical and won't move.
Make sure the pump is held tight again. Do not drop or damage.
2
1
3
4
5
6
Mounting adapter
